Hello from the wayback machine - Kral Question

All general BullPups chat to go in here.

Moderators: PANDEMIC, WalkonKing, Wingman NZ

Bean
Posts: 474
Joined: Mon Sep 29, 2008 4:25 pm

Hello from the wayback machine - Kral Question

Postby Bean » Wed Feb 15, 2017 6:00 pm

I don't think I've posted here in YEARS but, I keep up on new stuff.

Just took delivery of a Kral. The fill probe orings are garbage but I can't find the size.... probe is bigger than anything else I have and therefore the orings are too.....

I need to order quality replacements and my HF assortment is not helping me at all. Any clue??

Jeff

kidcurry
Posts: 75
Joined: Tue Aug 31, 2010 7:35 am
Location: MA

Re: Hello from the wayback machine - Kral Question

Postby kidcurry » Wed Feb 15, 2017 8:02 pm

Can't you measure it per the instructions here?
http://www.theoringstore.com/index.php?main_page=page_2

User avatar
Motorhead
New User
Posts: 40
Joined: Fri Oct 07, 2016 3:28 pm
Location: Northern California

Re: Hello from the wayback machine - Kral Question

Postby Motorhead » Thu Feb 16, 2017 1:27 am

Yup ....

O-rings cross section diameter & Internal diameter required. Easy peezy
Older & Slower Field target Shooter

"Home of Motorheads Air Gun Tuning Services"

Bean
Posts: 474
Joined: Mon Sep 29, 2008 4:25 pm

That'll do it. Thanks

Postby Bean » Thu Feb 16, 2017 11:17 am

note for others.... lots of sharp edges on my fill probe. Get extra orings....

dman1114
Posts: 2223
Joined: Thu Jul 18, 2013 8:25 am

Re: Hello from the wayback machine - Kral Question

Postby dman1114 » Thu Feb 16, 2017 12:08 pm

Lots of sharp edges on the whole gun.


Return to “BullPup General Chat”

Who is online

Users browsing this forum: No registered users and 3 guests